WDBLS

Other News

WDBLS - Concrete hex head screw for quick installation of permanent and temporary fastenings

SUBSTRATES

Cracked and non-cracked, reinforced and non-reinforced concrete C20/25 – C50/60.


NOTE!

The hole diameter is not equal to the thread diameter.


APPLICATION

Installation of temporary fastenings, e.g. formwork supports. Installation of guard rails, handrails. Installation of anchor brackets/ plates. Installation of metal profiles. Installation of safety barriers. Installation of beams and thresholds. Installation of equipment on construction site. Installation of racks. Installation of mounting rails and brackets. Installation of seasonal garden arrangement elements. Installation of garden tents.


NAIL MATERIAL

Carbon steel


CORROSION PROTECTION

  • WDBLS - Galvanized steel
    WDBLS Concrete screws Klimas Wkręt-met - ocynk

NO EXPANSION

No stresses characteristic for wedge anchors.

SIMPLE AND QUICK INSTALLATION

  • Driving of thread directly in hole in concrete.
  • No need to use expansion plugs and drop-in sleeves or other anchor mortars.
  • Ready to carry full capacity instantly.

LOW EXPANSION STRESSES

Therefore it can be used near edges and in dense spacing with other screws.

REUSABLE

Possibility to install / remove at any time.


 

SIZE CHART

WDBLS Concrete screws Klimas Wkręt-met - rysunek

  Product code Hole diameter Screw length Thread outer diameter Head type Quantity in package
    D0 [mm] L [mm] Dw [mm] [-] [pcs]
 
6 WDBLS-06040* 6 40 7,5 M13 100
WDBLS-06060 6 60 7,5 M13 100
WDBLS-06080 6 80 7,5 M13 100
 
8 WDBLS-08050 8 50 9,9 M13 50
WDBLS-08060 8 60 9,9 M13 50
WDBLS-08070 8 70 9,9 M13 50
WDBLS-08080 8 80 9,9 M13 50
 
10 WDBLS-10060 10 60 12,5 M13 50
WDBLS-10070 10 70 12,5 M13 50
WDBLS-10080 10 80 12,5 M13 50
WDBLS-10090 10 90 12,5 M13 50
WDBLS-10100 10 100 12,5 M13 50
WDBLS-10110 10 110 12,5 M13 50
WDBLS-10120 10 120 12,5 M13 50
WDBLS-10130 10 130 12,5 M13 50
WDBLS-10140 10 140 12,5 M13 50

* not covered by the ETA