WDBGW - Concrete screw with internal thread for quick installation of permanent and temporary fastenings
SUBSTRATES
Cracked and non-cracked, reinforced and non-reinforced concrete C20/25 – C50/60
NOTE!
The hole diameter is not equal to the thread diameter.
APPLICATION
Installation of metal and steel profiles. Installation of suspended fastenings. Installation of piping and ventilation ducting. Installation of temporary fastenings. Installation of systems with M8 and M10 threaded rods. Installation of steel decorative elements. Installation of mounting rails and brackets. Designed for internal use in dry conditions.
NAIL MATERIAL
Carbon steel
CORROSION PROTECTION
- WDBGW - Galvanized steel
NO EXPANSION
No stresses characteristic for wedge anchors.
TWO INTERNAL M8 and M10 THREADS
Allow for direct fastening of threaded rods.
SIMPLE AND QUICK INSTALLATION
- Driving of thread directly in hole in concrete.
- No need to use expansion plugs and drop-in sleeves or other anchor mortars.
- Ready to carry full capacity instantly.
LOW EXPANSION STRESSES
Therefore it can be used near edges and in dense spacing with other screws.
MULTIPLE-USE
Possibility to install / remove at any time.
SIZE CHART
Product code | Hole diameter | Screw length | Thread outer diameter | Metric thread | Wrench size | Quantity in package | ||
---|---|---|---|---|---|---|---|---|
D0 [mm] | L [mm] | Dw [mm] | [-] | [-] | [pcs] | |||
6 | 6 | 35 | 7,5 | M8/M10 | M13 | 100 | ||
WDBGW-06057 | 6 | 57 | 7,5 | M8/M10 | M13 | 100 |
* not covered by the ETA
Available from July 2021