LE-ZNA4 - Strong wedge anchor for standard static and seismic loads, designed for setting in either cracked or uncracked concrete
SUBSTRATES
Normal uncracked concrete, reinforced and non-reinforced C20/25 - C50/60 and cracked concrete.
APPLICATION
Installation of facade metal substructures in non-aggressive environments. Machine and device installation. Installation of railings, handrails, balustrades inside buildings. Installation of steel fittings, decorative elements inside buildings. Installation of light and medium metal structures inside buildings.
BOLT MATERIAL
Carbon steel
HEAD TYPE
Hexagonal nut
CORROSION PROTECTION
- LE-ZNA4 - Galvanized steel + Steel A4
FAST AND EASY INSTALLATION
- Fast and easy installation by driving in the anchor with hammer and tightening.
- Immediate load-carrying capacity
- Hole diameter equal to anchor pin diameter.
- Cold formed steel prevents the pin from cracking when driving in and tightening.
HIGHEST STRENGTH PARAMETERS
State-of-the-art machine park and long-standing experience have resulted in products characterized by the highest strength parameters. Our anchors are dedicated as a professional solution for the most important structural fastenings.
FIRE RESISTANCE R30 - R120
Anchors are characterized by fire resistance affecting safety of fastenings during fire. Resistance determined in fire conditions of R30 to R120 allows for selection of an economy fastening for any industry according to the required fire classification..
SEISMIC SURVEYS
Anchors have been tested for dynamic loads, and thus are approved for use in facilities developed on foundations in seismically active areas. This allows for designing reliable fastenings contributing to the improvement of safety of these structures.
![]() |
||
Informacje | Name | Wedge anchor |
Product code | LE-ZNA4 | |
Diameter | 8-16mm | |
Length | 60-165mm | |
Dokuments | ETA | ETA 20/0641 |
Characteristic resistance | up to 40kN | |
Seismic surveys | in progress | |
Fire resistance | R30 - R120 | |
Substrate | Non-cracked concrete | - |
Cracked concrete | Option 1 | |
Cracked concrete, mocowanie konstrukcyjne wielopunktowe |
Yes | |
Non-cracked concrete, multi-point non-structural fastening |
Yes | |
Material | ![]() |
bolt |
![]() |
clip |
SIZE CHART
Product code | Anchor diameter and length | Max. thickness of the el. fastened | Thread | Head type | Quantity in package | |
---|---|---|---|---|---|---|
dw x Lw [mm] | Lfix1 / Lfix2 [mm] | [-] | [-] | [pcs] | ||
M8 | 8x60 | 5 / - | M8 | SW-13 | 100 | |
LE-ZNA4-08075(X100) | 8x75 | 20 / - | M8 | SW-13 | 100 | |
LE-ZNA4-08095(X50) | 8x95 | 40 / - | M8 | SW-13 | 50 | |
LE-ZNA4-08115(X50) | 8x115 | 60 / - | M8 | SW-13 | 50 | |
LE-ZNA4-08135(X50) | 8x135 | 80 / - | M8 | SW-13 | 50 | |
LE-ZNA4-08155(X50) | 8x155 | 100 / - | M8 | SW-13 | 50 | |
M10 | LE-ZNA4-10085(X50) | 10x85 | 5 / 25 | M10 | SW-17 | 50 |
LE-ZNA4-10095(X50) | 10x95 | 15 / 35 | M10 | SW-17 | 50 | |
LE-ZNA4-10105(X25) | 10x105 | 25 / 45 | M10 | SW-17 | 25 | |
LE-ZNA4-10115(X25) | 10x115 | 35 / 55 | M10 | SW-17 | 25 | |
LE-ZNA4-10135(X25) | 10x135 | 55 / 75 | M10 | SW-17 | 25 | |
LE-ZNA4-10155(X25) | 10x155 | 75 / 95 | M10 | SW-17 | 25 | |
M12 | LE-ZNA4-12085(X40) | 12x85 | 5 / - | M12 | SW-19 | 40 |
LE-ZNA4-12095(X50) | 12x95 | 15 / - | M12 | SW-19 | 50 | |
LE-ZNA4-12105(X50) | 12x105 | 5 / 25 | M12 | SW-19 | 50 | |
LE-ZNA4-12115(X40) | 12x115 | 15 / 35 | M12 | SW-19 | 40 | |
LE-ZNA4-12125(X25) | 12x125 | 25 / 45 | M12 | SW-19 | 25 | |
LE-ZNA4-12145(X25) | 12x145 | 45 / 65 | M12 | SW-19 | 25 | |
LE-ZNA4-12165(X25) | 12x165 | 65 / 85 | M12 | SW-19 | 25 | |
M16 | LE-ZNA4-16105(X25) | 16x105 | 5 / - | M16 | SW-24 | 25 |
LE-ZNA4-16115(X25) | 16x115 | 15 / - | M16 | SW-24 | 25 | |
LE-ZNA4-16125(X25) | 16x125 | 5 / 25 | M16 | SW-24 | 25 | |
LE-ZNA4-16145(X20) | 16x145 | 25 / 45 | M16 | SW-24 | 20 | |
LE-ZNA4-16165(X15) | 16x165 | 45 / 65 | M16 | SW-24 | 15 |