New milling tip - easy and fast montage!

14 May 2021

Klimas Wkręt-met introduced a new shape of the WKCP, WKCS, KMWHT screw milling tip.

Listening to the voice of experienced contractors, the Research and Development Department of Klimas Wkręt-met developed a modern shape of the milling tip of the WKCP, WKCS and KMWHT carpentry screws. Research and tests have shown a significant improvement in the screw assembly parameters, while maintaining its high strength parameters. The new tip means even FASTER INSTALLATION, RELIABLE STRENGTH and LESS RESISTANCE when screwing.


 

DIFFERENCES BETWEEN THE OLD AND THE NEW TIP

Wood screws - new point

 

  • WKCS Carpentry screws Klimas Wkręt-met - MILLING TIPMILLING TIP
    Special design of the milling tip means up to 20% less refusal while the screw is advancing, which extends life of batteries and power tools themselves.

 

  • WKCS Carpentry screws Klimas Wkręt-met - DOUBLE THREADDOUBLE THREAD
    Additional coils on the tip facilitate advancing - they allow the fixed wooden member to be joined faster with less pressure..

 

  • WKCP Carpentry screws Klimas Wkręt-met - SERRATED THREADSERRATED THREAD
    Special cutting notches on the thread cut wood structural fibres while the screw is advancing.

 

  • WKCP Carpentry screws Klimas Wkręt-met - WAX COATINGWAX COATING
    With a special wax coating the torque has been reduced significantly. This provides for faster and easier installation. Also, battery life of power tools is extended.

 

The double thread causes the same effect to be achieved with much less pressure.

The new shape of the screw tip reduces the screwing time by up to 40% with the same load.

New tip macro

New tip macro02

The new shape of the milling tip allows you to achieve up to 20% less resistance when screwing. This parameter is particularly important for those specialists who use cordless tools on a daily basis - extension of battery life.


 

DOUBLE THREAD - QUICK INSTALLATION

Additional coils on the tip allow the fixed wooden member to be joined faster. Such advantage is particularly important with connections where pressing on the screw is hindered.

WKCP double thread

UP TO 40% FASTER ADVANCING TIME

Tests performed before the product has been implemented showed that a new design of the screw tip provides for the reduction of the advancing time by even 40% with the same load. Such saving depends on type of connection and the wood used

WKCP reduced screwing time

UP TO 20% LESS REFUSAL WHILE ADVANCING

The new design of milling tip reduces the refusal while advancing by 20%. This parameter is particularly relevant for such specialists who use power tools on a daily basis - as this extends battery life.

WKCP milling tip

HIGH RESISTANCE

Designed in cooperation with contractors, the new tip of carpentry screws facilitates installation and features high resistance, i.e. pull-out resistance, shearing resistance, etc.

WKCP pull-out strength

 


WKCP

Construction screws with a washer head

Construction screws with a washer head WKCPConstruction screws with a washer head WKCP

WKCS

Construction screws with a countersunk head

Construction screw with a countersunk headConstruction screws with a washer head WKCP

KMWHT

Construction screws with a countersunk head

Construction screw with a countersunk head KMWHTConstruction screws with a washer head WKCP

 

WKFC

Construction pan head screws

Screw for wooden constructions with full thread and pan head WKFCScrew for wooden constructions with full thread and pan head WKCP

WKFS

Construction countersunk head screws

Screw for wooden constructions with full thread and countersunk head WKFSonstruction countersunk head screws with full thread and TX drive WKFS

WKSS

Countersunk head distance screws

Distance screws WKSSCountersunk head distance screw WKSS

 

WKPC

Screws with double thread for over-rafter insulation

Screws with double thread for over-rafter insulation WKPCPan head screw with double thread WKPC

WKLC

Screws for wood construction connectors

Screws for wood construction connectors WKLCPan head screw with TX drive for wood construction connectors for fixing of three-dimensional wood construction connectors in timber substrates WKLC

 

SCREW MATERIAL AND OTHER TECHNICAL PARAMETERS REMAIN UNCHANGED


 

INCLUDED IN THE OFFER FROM 24.05.2021

Products will be replaced consecutively for screws with new milling tip once current stocks are out.

We also inform you that indices and bar codes of products remain the same.

Products with a new milling tip are marked as follows.

Klimas Wkręt-met wkręty ciesielskie nowa końcówka opakowanie

In case of any questions, please contact with our Customer Service or your consultant / ew. contact person.

24 September 2021

Klimas Wkręt-met at the International Forum Wood Building in Italy

13 July 2021

New mechanical anchors for concrete

12 July 2021

New carpentry screws

24 May 2021

Enhanced corrosion protection